3-section frame flexes 21 degrees up & down with narrow transport of 12 ft.
Features may include:
ExactShot™ liquid fertilizer dosing system
Save on in-furrow fertilizer cost with ExactShot liquid fertilizer dosing system.
High input costs reduce the profitability of any operation. ExactShot can save growers up to 66% of the cost of in-furrow applied nutrients improving their use and efficiency while protecting yield loss along the way. It does this by dosing the product on top of the seed, in the furrow, eliminating the application of product between seeds.
Using less product also results in fewer stops to refill your tanks, improving the overall efficiency of your planting operation.
Reduce in-furrow fertilizer use up to 66 percent
Increase time between starter liquid fertilizer refills in the field
Maximize nutrient use efficiency by placing product only on the seed
Enable the potential to add higher-cost or additional applications
Easy fluid transfer with the ExactRate™ fluid transfer system
The ExactRate fluid transfer system pairs planters seamlessly with the ExactRate tractor tanks. It provides an easy connection point to allow transfer from the ExactRate tractor tanks back to the planter tank. This enables up 6056 L (1600 gal.) of combined capacity between the tractor and planter tanks.
Factory installed
Designed and tested by John Deere to ensure the lines won’t pinch when folding
Easily attaches to the ExactRate tractor tanks
Easily carry fluid on the planter with liquid tanks
John Deere factory-installed liquid tanks offer a convenient way to carry fluid on the planter frame. Styling cues match the CCS™ system tanks, and all brackets and mountings are 100 percent factory installed.
Factory installed
Up to 2271 L (600 gal.) of fluid capacity
Clear sight tube to check fluid level
Air bleed and overflow protection
Decrease ground pressure with factory-installed tracks for 1775NT Planters
Alleviate the ground pressure in your center section with John Deere factory-installed tracks. The tracks offer a larger footprint to allow for less compaction and better flotation.
91.7-kPa (13.3-psi) ground pressure (based on weight distribution of a fully ballasted 24-row 1775NT Planter over track flat plate area)
32.2-km/h (20-mph) transport speed
Half-full carrying capacity during transport on a 24-row 1775NT Planter
100 percent factory installed
Increase visibility at night with light-emitting diode (LED) lighting package
As planting windows get tighter, many growers are working longer hours to get the seed in the ground. With the planter LED lighting package, John Deere delivers better visibility when planting a night.
Four additional LED lights
Improves visibility when planting at night
Illuminates row-units when servicing at night
Turns on when tractor lights are engaged
Photos
Highlights
Tunkhannock, Pennsylvania
2025
John Deere
Drawn Planters 1775NT 24Row30
Available
Field operation: 18977 mm (747.1 in.)
Specifications
2025
John Deere
Drawn Planters
1775NT 24Row30
Planters: Drawn
Minimum tractor size required: 90 kW (120 PTO hp)
Hydraulic variable rate drive
Implement tire: VF295/75R22.5
Hydraulic system working: 20,684 kPa / 206.84 bar (3000 psi) | burst: 82,737 kPa / 827.37 bar (12,000 psi) | Tractor standby: 15,514 kPa / 155.14 bar (2250 psi)
Row spacing: 76 cm (30 in.) | Frame - Flexibility: Up and down: 21 degree (angle)
Field operation: 8862 mm (348.9 in.)
3588 mm (141.26 in.)
13320 mm (524.4 in.)
With markers: 3500 mm (137.8 in.)
Field operation: 18977 mm (747.1 in.)
Row unit seed: 2.2 L (0.062 bu) / 58 L (1.65 bu) / 106 L (3.0 bu)
Hydraulic required to operate machine: 5.7 L (1.5 gal.)
Central Commodity System: Seed capacity 4581 L (130 bu) | Fertilizer Tank capacity: 2271 L (600 gal.)
Number of rows: 24 | Markers Type: Automatic alternating or independent control | Row Units type: MaxEmerge™ 5 row units